Zero Turn Lawnmower

Spring is just around the corner and some people say that spring is the time for a young man's fancy to turn to love. In most cases the young man has to turn his thoughts and ideas to mowing the lawn or if he works for a landscaper than his thoughts turn even more toward mowing lawns. Lawns come in a variety of sizes and configurations. The average lawnmower does not do the job and in order to have that well manicured look you have to finish the job by hand. If you are savvy in lawn mowing equipment and you have a lot of lawn to mow or you are a landscaper, you may want the zero turn lawnmower.
The zero turn lawnmower is like a front loading tractor. The rear wheels turn separately without turning the body of the mower. This sort of movement enables the mower to move completely around and work in places that would not be possible with a push lawnmower.
The zero turn lawnmower does the best job on large lawns of at least half an acre and is best on lawns with obstacles such as trees, sheds, shrubs and other obstacles with which the sit on lawnmower cannot do well. There is one warning concerning the zero turn mower and that it has a tendency to roll over. If you have a flat terrain this is not a problem but if your lawn has any amount of ups and downs and hilly spots than the mower should have a roll-over bar attached.
The tractor type lawnmower is generally bought by the homeowner because it is cheaper. If you have a lot of lawn to mow or are a professional landscaper, than the zero turn mower is your best choice. The zero turn lawnmower may not be cheap but works faster than the standard tractor mower. For the commercial lawn care professional time is of the essence. Time is important as well for today's busy home owner. If you are thinking tractor mower, the zero turn lawnmower is worth looking into.

Tree-thanasia - The Many Methods For Mercifully Murdering a Tree

Normally, killing a tree is a crime to the environment. But there are instances when it just can't be helped. Sometimes the tree may have become an unwanted obstruction, or perhaps it may be diseased, in which case getting rid of it is the merciful thing to do. Whichever the case may be, one may choose from a number of efficient means of how to kill a tree.
Of course, the typical way for how to kill a tree, and probably the first idea that comes to most people's minds, is to simply cut it down. One may decide to chop it down with an axe, or if the tree is just too big for it, cutting it down with a chainsaw. However, there are environmental laws that govern the act of cutting trees, so one should first confer with the proper authorities about the legalities and the proper procedures before carrying out the deed.
A slow but sure approach for killing a tree is to poison it with herbicides. One should be very careful though, as these chemicals could also be hazardous to one's own health if not handled properly. The instructions for using the herbicide must be followed exactly as written; haphazard use of it may result in affecting and destroying other neighboring plants, as well.
A brand of weed-killer called "Roundup" is another effective way to poison a tree. Again, caution must be exercised in handling it so as not to endanger other trees and plants in the vicinity. To apply it safely, one should drill several holes around the tree trunk at a vertical angle, and then pour the weed-killer into the holes (be sure to use a funnel to prevent spilling). The tree should be dead in not longer than 2 weeks.
A somewhat natural method of how to kill a tree is by having moist and fungus, which is poisonous to trees, grow on it. This is done by first drilling holes measuring a diameter of approximately 1 ½ inches around the trunk. The hole is then filled with nitrogen fertilizer in order to keep the tree moist and thus causing fungus to grow. The tree should then decay within a period of 4 up to 6 weeks. A very slow process, but effective nonetheless.
The easiest way to kill a tree involves nothing more than ordinary salt and water. A trench is dug around a tree, into which a mixture of one-part salt and two-parts water is poured. Preferably, the salt-water mix should be poured in 4 times for the best results. As with the fungus technique, it should take between 4 up to 6 weeks for the tree to deteriorate.
It isn't very hard to figure out how to kill a tree. The methods that we have just presented are pretty straightforward and easy to follow. But as with any other act of taking a life, the killing of a tree should be done only when absolutely necessary. Trees are, after all, a very important and beautiful part of nature. But should the need to put one out of its misery arise, one should have the right tools and the proper knowledge to get the job done.